Boss Audio BV7943 User Manual - Page 16

Track Time Search, Slow Motion, Multi-Angle View, Video System, Programmer Mode, Electronic Shock

Page 16 highlights

DVD/VCD/CD/MP3/WMA Operation(Con'd) The audio languages available differ from Disc to Disc. You can also use the setup menu to confirm. Refer to the packing of the Disc for details. VCD: Press AUDIO during playbackIt is possible to switch the sound between mono and stereo sound. The sequence is as follows: Mono Left --> Mono Right --> MIX MONO --> STEREO 8. Track Time Search Press the GOTO button on the remote control to search the desired track time to play the Disc. The OSD will be prompted. Make use of the navigation keys and digit keys on the remote control to choose your desired chapter, track or time. Press the ENTER button to confirm your selection. 9. Zoom +/Press the ZOOM button on the remote control to perform the zoom function. The zoom range is from 1/4 up to 4 (total 7 stages), according to the zooming intensity. 10. Slow Motion Press the SLOW button on the remote control to perform slow montion of the video play. SF 1/2 up to 1/7 will be shown, according to the slowness. Cycle back to normal playback of press the Play/Pause button to resume. 11. Multi-Angle View Press the ANGLE button on the remote control to perform multi-angle playback. The number of angles change in sequential order. Note: The number of angles is different according to the disc. The function only work for discs having scenes recorded at different angles. When no different angle is recorded, the OSD will show "INVALID KEY" 12. Video System Press the BND/NP/SUB button on the headunit or remote control to choose between NTSC, PAL, AUTO, according to the encoding format of the disc. The default mode is AUTO. Use this function if there is something wrong about the display function (eg. no color is display). 13. Programmer Mode Press the PROG button on the remote control to set the program play. Use the Navigation and Digit keys to set the Chapter and Track no. as your desired sequence. Press Enter to begin the program play. Press the PROG button and confirm a blank program again to cancel this operation. 14. Electronic Shock Protection This unit is programmed with Electronic Shock Protection (ESP) so that the video/music will be protected against rough roads. Electronic Shock Protection time depends on the media that is being played. ESP for playing DVD is 5 seconds, for playing VCD is 10 seconds, for playing CD is 12 seconds, for MP3 is 180 seconds. This is built-in function so that there is no need to switch on or switch off. 15

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24

15
The audio languages available differ from Disc to Disc. You can also use the
setup menu to confirm. Refer to the packing of the Disc for details.
VCD: Press AUDIO during playbackIt is possible to switch the sound
between mono and stereo sound. The sequence is as follows:
Mono Left --> Mono Right --> MIX MONO --> STEREO
8. Track Time Search
Press the GOTO button on the remote control to search the desired track
time to play the Disc. The OSD will be prompted. Make use of the navigation
keys and digit keys on the remote control to choose your desired chapter,
track or time. Press the ENTER button to confirm your selection.
9. Zoom +/-
Press the ZOOM button on the remote control to perform the zoom function.
The zoom range is from 1/4 up to 4 (total 7 stages), according to the zooming
intensity.
10. Slow Motion
Press the SLOW button on the remote control to perform slow montion of the
video play. SF 1/2 up to 1/7 will be shown, according to the slowness. Cycle
back to normal playback of press the Play/Pause button to resume.
11. Multi-Angle View
Press the ANGLE button on the remote control to perform multi-angle play-
back. The number of angles change in sequential order.
Note: The number of angles is different according to the disc. The function
only work for discs having scenes recorded at different angles. When no
different angle is recorded, the OSD will show “INVALID KEY”
12. Video System
Press the BND/NP/SUB button on the headunit or remote control to choose
between NTSC, PAL, AUTO, according to the encoding format of the disc.
The default mode is AUTO. Use this function if there is something wrong
about the display function (eg. no color is display).
13. Programmer Mode
Press the PROG button on the remote control to set the program play. Use
the Navigation and Digit keys to set the Chapter and Track no. as your
desired sequence. Press Enter to begin the program play. Press the PROG
button and confirm a blank program again to cancel this operation.
14. Electronic Shock Protection
This unit is programmed with Electronic Shock Protection (ESP) so that
the video/music will be protected against rough roads. Electronic Shock
Protection time depends on the media that is being played. ESP for playing
DVD is 5 seconds, for playing VCD is 10 seconds, for playing CD is 12 sec-
onds, for MP3 is 180 seconds. This is built-in function so that there is no need
to switch on or switch off.
DVD/VCD/CD/MP3/WMA Operation(Con’d)