Boss Audio BV7948B User Manual in English - Page 14

7. PTY (PROGRAM TYPE) BUTTON Press the PTY button shortly to select one of the following mode: PTY MUSIC group- - PTY SPEECH group- - PTY OFF When PTY group is on, press the VOL+ or VOL- button on the remote controller or rotate the VOL knob on the front panel to select one of PTY programs: NEWSAFFAIRSINFOSPORTEDUCATE DRAMACULTURE SCIENCE VARIEDWEATHER FINANCECHILDRENSOCIALRELIGIONPHONE IN TRAVELLEISUREDOCUMENT< -->PTY NONEPOP M< --> ROCK MEASY MLIGHT M CLASSICSOTHER M JAZZCOUNTRYNATION MOLDIESFOLK M When PTY group is on, pressing the 6 number buttons also can select one of PTY programs as above. After selecting one of the PTY programs, it will display SEEK PTY and automatically search for the station of the PTY program. If the station of the PTY program does not exist, it will display PTY NONE and then return back to the normal station. 8. AF [ALTERNATIVE FREQUENCIES] BUTTON When pressed the AF button short, the AF switching mode is selected and the state of the AF switching mode is displayed by AF segment in display. Segment off: AF switching mode off. Segment on: AF switching mode on, and has RDS information. Segment flashing: AF switching mode on, but RDS information is not received yet. When the AF switching mode is selected, the radio checks the signal strength of the AF all the time. The interval of checking time of each AFs depends on the signal strength of the current station, from a few minute for the strong station to a few seconds for the weak station. Every time that a new AF is stronger than the current station, it switches over to that frequency for very short time, and the NEW FREQUENCY is displayed for 1-2 second. Because the mute time of the AF switching or the checking time is very short, it is almost inaudible in case of normal program. (When AF flash on LCD, it will search for the stronger RDS station. If AF and TP flash on LCD, it can only search for the traffic announcement station). In FM mode, when AF is on, SEEK, (SCAN), AUTO-MEMORY function can only receive and save the RDS program. 9. TA [TRAFFIC ANNOUNCEMENT] BUTTON Press the TA button shortly to turn on TA search mode. When traffic announcement is transmitted: 1).If the unit is in Disc Play mode, it will switch to radio mode temporarily. 2).Temporarily switch over to an EON linked station when EON detects a traffic announcement on that other program, and TA, TP will be displayed on LCD * TA interruption function: The current traffic announcement is cancelled by pressing TA button shortly. * When TA is on, SEEK, (SCAN), AUTO MEMORY function can be received or saved only when traffic program identification code has been received. PDF created with FinePrint pdfFactory trial version http://www.pdffactory.com 3. During JPEG playback, press one of the >/: 90 deg cw; or < button to select an desired setup page. 3. Press the ^ or v button to select an setup item in the selected setup page. 4. Press the > button to enter the setup item. Then press the v or ^ button to select a desired mode of the setup item, finally press the OK button to confirm it. * Press the < button to return to the upper level. * Press the SETUP button again or use the direction buttons to highlight the item of the EXIT SETUP and then press the OK button to exit the System Menu.