Boss Audio BV9152 User Manual in English - Page 7

Electrical Connection - new

Get Boss Audio BV9152 PDF manuals and user guides View all Boss Audio BV9152 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 7 highlights

3. ELECTRICAL CONNECTION a. Make sure your car battery is a 12 volt (6 filler caps) negative ground system (if not, a converter will be necessary). b. Before starting wiring connections, disconnect the power supply by removing the fuse from the fuse box. c. Connect the power wire to one of the extra terminals of the fuse box. d. Connect the black ground wire to a metal part of the car. It is important to make good contact. e. Make other wiring connections as shown. f. If your car does not have ISO connector, you can purchase it from car accessory shops. Notes: INCORRECT WIRING OR OPERATION WILL VOID THE WARRANTY OF THIS UNIT. (CAR UNIT BACK SIDE) Fuse Replacement: To replace the fuse, pull out the blown fuse from the socket. Insert a new one with same rating FUSE RESET BUTTON The RESET button is located on the main unit (as shown on the diagram). To press it vertically with a ballpoint pen or metal object to activate it. The reset button should be activated for the following reasons: Initial installation of the unit when all wiring is completed. All the function buttons do not operate. Error symbol on the display. Note: If you press the RESET button, and the unit still cannot function normally, please use a cotton swab soaked in isopropyl alcohol to clean the socket on the back of the control panel. E - 4

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
E - 4
3. ELECTRICAL CONNECTION
a.
Make sure your car battery is a 12 volt (6 filler caps) negative ground system (if not, a
converter will be necessary).
b.
Before starting wiring connections, disconnect the power supply by removing the fuse from
the fuse box.
c.
Connect the power wire to one of the extra terminals of the fuse box.
d.
Connect the black ground wire to a metal part of the car. It is important to make good
contact.
e.
Make other wiring connections as shown.
f.
If your car does not have ISO connector, you can purchase it from car accessory shops.
Notes: INCORRECT WIRING OR OPERATION WILL VOID THE WARRANTY OF THIS UNIT.
Fuse Replacement:
To replace the fuse, pull out the blown fuse
from the socket. Insert a new one with same
rating
(CAR UNIT BACK SIDE)
The RESET button is located on the main unit (as shown on the diagram). To press it vertically
with a ballpoint pen or metal object to activate it. The reset button should be activated for the
following reasons:
Initial installation of the unit when all wiring is completed.
All the function buttons do not operate.
Error symbol on the display.
RESET BUTTON
Note:
If you press the RESET button, and the unit still cannot function normally, please use a
cotton swab soaked in isopropyl alcohol to clean the socket on the back of the control panel.
FUSE