Boss Audio BV9967B User Manual - Page 6

INSTRUCTIONS REMOTE CONTROL FUNCTION 28 28 DSP 05 INSTRUCTIONS Audio setting Click icon on setup interface to access audio setting interface, as shown in right(PIC 1) diagram: You can turn on or turn off the existing functions on audio setting interface. Steering wheel setting PIC 1 I. Click icon on setup interface so as to access steering wheel setting interface. II.Connect anode and cathode of direction control wire of the car with anode and cathode of direction control wire of this device, and press the buttons on steering wheel one by one and record the corresponding sequence and functions, then click [Allocation]. III. Click the button of steering wheel needs to be allotted so as to select the corresponding setting function, such as volume +. IIII. Buttons on steering wheel shall display the corresponding functions, such as volume + . To modify function settings, repeat procedures 3~4. Click [Enter] to save the settings. To reset functions, click [Reset] icon, all the settings set before shall be cleared, repeat procedures 3~4 for resetting. Touch calibration If touch calibration error occurs, you can adjust the touch coordinate by "Touch calibration". Click icon on setup interface, input password [888888] to confirm to access touch calibration interface, as shown in below diagram: Touching methods Use touch pen to click the center of "+" icon, and move along with center of "+" icon so as to calibrate the screen. It shall automatically save data and exit after screen calibration. Please accurately click all positions on screen, or the accuracy of touch calibration shall be affected. 14