Boss Audio MCBK475BA User Manual - Page 4
MCBK475BA, Motorcycle/UTV, Amplified, Speaker, System, Motorcycle/EV, Installation, Wiring,
View all Boss Audio MCBK475BA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
MCBK475BA Motorcycle/UTV Amplified Speaker System Installation 1. Screw the brackets to the bottom of the speakers. 2. Find a safe, ideal mounting location and fit the brackets over the chosen mounting bars. 3. Fasten the mounting screws after you review the safety of the mounting location. Wiring 1) Remove the seat. 2) Route the fused power leads to the battery. (keep away from moving parts and/or hot exhaust) 3) Connect the RED ring terminal to the +12V post of the battery. 4) Connect the BLACK ring terminal to ground post of the battery. 5) Connect the power connector to the white mating connecter leading to the speaker. Power Switch 1) The switch is used to Power On/off the system. 2) It can be mounted near the volume control for easy access. 3) Reinstall the seat. 4 BATTERY 110AI uu SWITCH TO SPEAKERS 3 MCBK475BA Motorcycle/EV Amplified Speaker System Connections Loudspeakers L jw BtacK Volume Control Audio Cable Fuse:10A eZe ) Loudspeakers R To output of audio device Power cable Red Please see wiring diagram Black Ground Amplifier and Loudspeaker Mounting Install Reminder The components and wiring should not be installed around any moving parts, keep away from ignition parts, fuel lines, or any hot exhaust Speakers should not be installed where they might inhibit safety features on the vehicle (i.e. lights, horns, brake levers, etc...) Bluetooth To pair and connect your Bluetoth device to the MCBK475BA Enter Settings > Bluetooth Menu > Search > " Boss Audio MCBK475BA" >If Prompted to enter a passcode enter : "0000" 4