Boss Audio MRGB55B User Manual - Page 5
Before, Installing, Product, Technical, Support
View all Boss Audio MRGB55B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
BEFORE INSTALLING THIS PRODUCT To avoid potential shorts in the electrical system, be sure to disconnect the (-) battery cable before installation. Use this unit with a 12-volt battery and negative grounding only. A A CAUTION RISNOr flECIAIC SHOCK 00 NOTOPEN GOMM AMICEINFRISKOF IELMCSNOCIOOHOT REMMONERIPMCM.NOUSERSERVICEMILEPONS MIX EFERSFRVICIN4TO QUALFIFOSIERMPROWL Failure to do so may result in a fire or malfunction. When replacing the fuse, be sure to only use a fuse of the rating specified on this product. To avoid short-circuiting, cover any disconnected leads with insulating tape. It is especially important to insulate any unused wires, which if left uncovered may cause a short circuit. When connecting other devices to this product, refer to the manual for the product to be connected. The black cable is ground, make sure to connect the ground wire first. Ensure that the ground cable is properly connected to metal parts of the vehicles body frame or direct to the battery if your vehicle does not have a grounded chassis frame The ground cable of this units power amp and a second powered system must be connected to the frame separately with different screws. If the screw for the ground wire loosens or falls out, it could result in fire or malfunction. C TECHNICAL SUPPORT 1-805-751-4853 www.bossaudio.com/technical-support TOOLS NEEDED: - Wrench and/or Pliers - #2 Phillips screwdriver - Crimp tool - Handsaw / Jig Saw - Electrical tape 3ONN AUDIO SYSTEMS