Bowflex Motivator 2 Assembly Manual - Page 9

Assembling Your Bowflex® Motivator® 2 Home Gym STEP 7 Parts: • Seat Rail Assembly (from Step 6) • Base Assembly (from Step 3) • Threaded Knob Tools: • Hex Key (7/32") • Wrench (9/16") - or Adjustable Wrench Threaded Knob Button Head Screw Seat Rail Assembly Washer 7-1 Remove tie wrap holding the Seat Rail pivot bushings. 7-2 Place the Seat Rail Assembly under the Base Assembly. 7-3 Install hardware and tighten so the Seat Rail pivots freely. 7-4 Install the Threaded Knob. Hardware (1:1): Washer Nylock Nut Base Assembly 1 Button Head Screw (3/8" X 4.5") STEP 8 Parts: • Upper Lat Tower • Lat Tower Cross Bar w/Pulleys & Cables Tool: • Hex Key (7/32") 8-1 Place the Upper Lat Tower against the Lat Cross Bar. 8-2 Install and completely tighten the hardware. 8-3 Donot unwrap the Cables from the Pulleys. Hardware (1:1): 2 Washers (3/8") 1 Nylock Nut (3/8") Upper Lat Tower Washer 2 Button Head Screws (3/8" X 2.25") 2 Washers (3/8") Button Head Screw Lat Cross Bar w/Pulleys & Cables Assembling Your Bowflex® Motivator® 2 Home Gym A7