Bowflex Revolution XP Assembly Manual - Page 19

Assembly 19 Step 14 Install Pre-Tension SpiraFlex® Packs. Tools: • 3/32" Allen Wrench (Box 1) Pre-tension SpiraFlex®Pack #8-32 X 3/8" Allen screw Side view of pre-tension SpiraFlex ® pack Hooks toward main unit Parts: • Pre-tension SpiraFlex® Packs (Box 1) 14-1 Align the rounded edge of the Pre-tension SpiraFlex® Pack with the rounded edge of the Tension Shaft and slide it all the way onto the shaft. Cam 14-2 When the Pack makes contact with the Cam, continue to apply pressure and twist the Pack to the left until you feel the Pack seat into place. 14-3 Install and completely tighten hardware, installing screws in a star pattern around pre-tension pack. Hardware (1:1): Hardware for this step located in Box 1 12 Allen Bolt ( # 8-32 X 3/8") Remove Cam Holders Step 15 Remove Cam Holders. Tools: • Phillips Head Screwdriver 15-1 Use a Phillips Head Screwdriver to remove the Cam Holders. Cam Holders Note: The Cam Holders are only needed when the Spiraflex® packs are not installed and may be discarded or recycled. Allen Bolt