Bowflex Ultimate 2 Accessory Pack Assembly Manual - Page 5

Parts: • Side Tubes (#9) • Bottom Bracket (#10) � Hardware Qty • 2 3/4" Bolts (#13) 4 • Washers (#15) 8 • Nuts (#14) 4 �� Tools: • Allen wrench (7/32") �� • Wrench/Socket (9/16") or Open End Wrench 1-1 Attach the Bottom Bracket (#10) to the Side Tubes (#9) using the hardware shown in Figure 1. Note: Do not tighten hardware at this time. Figure 1 �� � step 1 Parts: �� • Base assembly from Step 2 • Base Support (#1) Hardware Qty • 2 3/4" Bolts (#13) 2 • Washers (#15) 4 • Nuts (#14) 2 Tools: • Allen wrench (7/32") • Wrench/Socket (9/16") or Open End Wrench 2-1 Carefully tilt the base assembly forward to rest on the four Side Tube ends. Attach the Base Support (#1) to the Bottom Bracket (#12) using the hardware as shown in Figure 2. Make sure that the Base Support feet are pointing away from the base assembly. � Note: Do not tighten hardware at this time. 2-2 Turn the base assembly upright to rest on all four feet. Figure 2 step 2 5