Bowflex Xceed Plus Assembly Manual - Page 16
Step 15, Step 16
![]() |
View all Bowflex Xceed Plus manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Assembly Guide Step 15 Install Upper Lat Tower Assembly Parts: • Upper Lat Tower Assembly • Main Assembly Hardware (1:1): • 6Button Head Screws (3/8" X 3/4") • 6Washers (3/8") Tool: 7/32" Hex Wrench 15-1 P osition the Upper Lat Tower Assembly . over the Lower Lat Tower Assembly. 15-2 S lide the Upper Lat Tower onto the . Lower Lat Tower and secure with screws . and washers as shown. Upper Lat Tower Flat Washers Button Head Screws 2ODSNOTSHOWN FORCLARITY Flat Washers Button Head Screws Lower Lat Tower Step 16 Tighten Hardware 16-1 Carefully go over the entire Bowflex Xceed™ Plus home gym and tighten all hardware before proceeding to the next step. Pay close attention to the hardware installed in Steps 1, 3, 4, and 6. 3QUATPULLEYFRAMENOTSHOWNFORCLARITY 14 Bowflex Xceed™ Plus Assembly Manual
![](/manual_guide/products/bowflex-xceed-plus-assembly-manual-fa5e3e1/16.png)