Brother International 2400c Users Manual - English - Page 90
Pen Setting, Character Set
UPC - 012502524922
View all Brother International 2400c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
CHAPTER 4 CONTROL PANEL GRAPHICS MODE Note The settings in this mode menu are effective only in the HP-GL mode. They do not appear in any other emulation modes. Since the HP-GL emulation mode is for a plotter, you can select the plotter pens, the pen size and percentage of gray in this mode menu. Display Message PEN SETTING CHARACTER SET Graphics Mode Set the size and percentage of gray separately for six plotter pens. Set the standard and alternate character sets. Note In most cases, the application software controls the above graphics mode settings, so you do not need to set them in this menu with the Mode button. The software or command setting overrides the button setting. Select the setting menu and enter the sub-setting menu to make the settings as follows: s Pen Setting After you select the pen, advance to the sub-setting menu for size or graypercentage selection with the v or w button and enter the menu with the Set button. Message appears on the lower row of the LCD SIZE 1=3 dots * GRAY 1=100% * What you can adjust The pen size can be set from 1 dot to 10 dots The shades of gray can be set to 15, 30, 45, 75, 90 or 100% Notes When another pen is selected, the display shows the selected pen with the number after "SIZE' or "GRAY." Whichever resolution, 300 or 600 dpi, you have selected, the pen size takes effect in units of 300 dpi. 4-27