Brother International 2600CN Driver Setup Guide for Windows - English - Page 2
Driver Installation Guide, For non-Network Users - hl printer
UPC - 012502601579
View all Brother International 2600CN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
Driver Installation Guide Windows® For non-Network Users Follow the instructions in this guide for your interface cable. Some illustrations are based on the HL-2600CN series. Steps 1 to 5 Follow these steps in the Quick Setup Guide first. For USB Interface Cable Users Only Step 6 Install the Driver & Connect the Printer to Your PC Note: When the "Add New Hardware Wizard" appears on your PC, click the Cancel button. Note: Make sure the USB interface cable is NOT connected to the printer, and then begin installing the driver. If you have already connected the cable, remove it. 1 Insert the CD-ROM into your CD-ROM drive. The opening screen will appear automatically. Follow the instructions on the screen. For Parallel Interface Cable Users Only Step 6 Connect the Printer to Your PC & Install the Driver 1 Turn off the printer power button. 2 Connect the parallel interface cable to your PC, 3 Turn on the printer and then connect it to your printer. power button. Note: If the "Add New Hardware Wizard" appears on your PC, click the Cancel button. 4 Insert the CD-ROM into your CD-ROM drive. The opening screen will appear automatically. Follow the instructions on the screen. 5 Click the Install Software icon on the Menu screen. 6 Click "Printer Driver." 7 Click the Next button. 2 Click the Install Software icon on the Menu screen. 3 Click "Printer Driver." 4 Click the Next button. Follow the instructions on the screen. 5 Select "Standard Installation," and then click the Next button. 8 Select "Standard Installation," and then click the Next button. 9 Select "Local Printer," and then click the Next button. 10 Select the port where your printer is connected, and then click the Next button. 11 Click the Finish button. The setup is now complete. 6 Select "Local Printer with USB cable," and then click the Next button. 7 When this screen appears, make sure the printer power button is on. Connect the USB interface cable to your PC, and then connect it to the printer. Click the Next button. 8 Click the Finish button. The setup is now complete. *1 *1 Please follow the steps below when the printer is not set as the default printer. Note: Setting Your Printer as the Default Printer (For Windows® 2000/XP users only) 1 Click Start, Settings and Printers. 2 Select the Brother HL-2600CN series or HL-3450CN series icon. 3 From the File menu, select Set as Default printer. ©2001 Brother Industries, Ltd. ©1998-2001 TROY XCD Inc. ©1983-1998 PACIFIC SOFTWORKS INC. ALL RIGHTS RESERVED Windows and Windows NT are registered trademarks of Microsoft Corporation in the U.S. and other countries. HP, HP/UX, JetDirect and JetAdmin are trademarks of Hewllet-Packard Company. UNIX is a trademark of UNIX Systems Laboratories. PostScript is trademark of Adobe Systems Incorporated. Netware is a trademark of Novell, Inc. Apple Macintosh, iMac, LaserWriter, and AppleTalk are trademarks of Apple Computer, Inc. BRAdmin Professional is a trademark of Brother Industries, Ltd. All other brand and product names mentioned in this Quick Setup Guide and User's Guide are registered trademarks or trademarks of their respective companies. Control Panel Power K CMY NETWORK READY HL-2600CN Ready Data Alarm Go Job Cancel Secure Print Reprint Back Set For more information, see "CONTROL PANEL OPERATION" in Chapter 4 of the User's Guide on the supplied CD-ROM. LEDs Power (Green) Ready (Green) Data (Orange) Alarm (Red) Lights when the printer power is on. Lights when the printer is ready to print or is printing. Lights when data remains in the printer buffer. Blinks when the printer is receiving or processing the data. Lights when the printer has a problem (Operator Call, Error, Service Error) and suspends printing. Buttons Go Job Cancel Secure Print Reprint Menu Set Back Exit from the control panel menu, Reprint settings or clear error messages. Pause / Continue printing. Stop and cancel the printer operation in progress. Print secure documents. Select the Reprint menu. Move forward through menus. Move backward through menus. Select the control panel menu. Set the selected menus and settings. Go back one level in the menu structure. Language Setting (Default is English) 1. Select the SETUP mode by pressing the + button, and then press the Set button. 2. Check that the LANGUAGE message appears, and then press the Set button. 3. Choose your language by pressing the + or - button, and then press the Set button. An asterisk mark (*) appears at the end of the display. (You can return to the READY status by pressing the Go button.) Note 1. A real-time clock is built into this printer. Set the time referring to Chapter 4 of the User's Guide on the CD-ROM. You need to set the time before you can use the log management and Reprint functions. 2. Please enhance the RAMDISK size when you want to use the Reprint functions without the optional HDD or CompactFlash. See RAM expansion. In the HL-2600CN User's Guide (Chapter 5) or in the HL-3450CN User's Guide (Chapter 6).