Brother International 5150DLT User Guide - Page 81
Service call indications, Table 1: LED indications while pressing Go and Job Cancel
UPC - 125026097428
View all Brother International 5150DLT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
Service call indications If there is an error that cannot be cleared by the user, the printer will show that a service call is needed by lighting up all the LEDs as shown in Figure 3-12. Toner Drum Paper Status Figure 3-12 If you see the service call indication above, follow the steps below: 1 Take out the DIMM (Dual Inline Memory Module) from your printer, if you have a DIMM installed. 2 Turn off the power switch, wait a few seconds, and then turn it back on and try to print again. If you cannot clear the error and see the same service call indication after turning the printer back on, call your dealer or a Brother authorized service representative. When you press the Go and the Job Cancel buttons together, the LEDs will light up with one of the combinations shown in Table 1. See Table 1: LED indications while pressing Go and Job Cancel on page 3-6 to identify the error. For example, the LED indication below shows a fixing unit failure. Toner Drum Paper Status Figure 3-13 CONTROL PANEL 3 - 5