Brother International 5250DN Users Manual - English - Page 77
Improper Setup, Press and hold down - drum reset
![]() |
UPC - 012502614449
View all Brother International 5250DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
6. Routine Maintenance When you replace the drum unit with a new one, you need to reset the drum counter by completing the following steps: a Make sure that the printer is turned on and the Drum LED is blinking. Press the front cover release button and then open the front cover. b Press and hold down Go for about 4 seconds until all the LEDs light up. Once all four LEDs are lit, release Go. Improper Setup Do not reset the drum counter when you only replace the toner cartridge. c Take out the drum unit and toner cartridge assembly. 69
![](/manual_guide/products/brother-international-hl-5240-users-manual-english-ca300dd/77.png)
6. Routine Maintenance
69
When you replace the drum unit with a new one, you need to reset the drum counter by completing the
following steps:
a
Make sure that the printer is turned on and the
Drum
LED is blinking. Press the front cover release button
and then open the front cover.
b
Press and hold down
Go
for about 4 seconds until all the LEDs light up. Once all four LEDs are lit, release
Go
.
Improper Setup
Do not reset the drum counter when you only replace the toner cartridge.
c
Take out the drum unit and toner cartridge assembly.