Brother International 634D Users Manual - English - Page 5

Needle *TE x 1 (#11 & #14), DB x 1 (#9, 11, 14), DB x 1KN #11, 1738 or 16 x 231 can be used on these machines. TE x 1 (#14) is mounted on the machines. NOTE: It is recommendable to use the golden needle (DBx1 KN#11) in the accessory when sewing knitted garments. To remove the needle (1) Turn the pulley clockwise by hand until the needle is raised to the highest position. (2) Loosen the needle set screw with the hexagonal wrench and remove the needle. NOTE: When removing the needle, hold the needle by hand to avoid dropping it. To fit the needle (1) Turn the pulley until the needle bar is raised to the highest position. (2) Hold the needle with its long grooved side to the front and insert it as far as the needle stop. (3) Tighten the needle set screw securely, taking care that the needle is set in the correct position. Needle se screw Needle bar 0 *When the needles are inserted correctly, the right needle should be set slightly lower than the left one. Long grooved I Hexagonal toward you wrench 3 •