Brother International 790CW Users Manual - English - Page 39
General setup, On/Off key, Turning the machine off, Power Off setting - cleaning
UPC - 012502620501
View all Brother International 790CW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
3 General setup 3 On/Off key 3 You can turn the machine on and off by pressing the On/Off key. Note • If you press the On/Off key while the machine is in use it will finish the operation before going into the Off mode. • If you have connected an external telephone or TAD, it is always available. Turning the machine off 3 a Press the On/Off key. The LCD will tell you that you cannot use the phone once it is switched off. Press Yes. The LCD shows Shutting Down and will stay on for a few seconds before going off. Turning the machine on 3 a Press the On/Off key. Power Off setting 3 You can customize the machine's On/Off key. The factory setting is Fax Receive:Off (MFC-790CW) and Fax Receive:On (MFC-990CW). Your 3 machine will not work when it is switched off, but it will clean the print head periodically. If you turn this setting to Fax Receive:On, you can receive faxes or calls even when the machine is switched off. (See On/Off key on this page.) a Press MENU. b Press a or b to display General Setup. c Press General Setup. d Press a or b to display PwrOff Setting. e Press PwrOff Setting. f Press Fax Receive:Off or Fax Receive:On. (MFC-790CW) Go to step h. (MFC-990CW) If you choose Fax Receive:On, go to step g. If you choose Fax Receive:Off, go to step h. g Press Ring Tone:On. Make sure you set the Ring Volume to Low, Med or High. (See Ring Volume on page 26.) h Press Stop/Exit. Note If you choose Ring Tone:Off, the machine will not ring when you receive a call. 23