Brother International 8050N Network Users Manual - English - Page 66
Queue Server, Change Bindery Queues, New Queue, Close, Print Server Name, 7 NOVELL NETWARE PRINTING
UPC - 012502608189
View all Brother International 8050N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
3 One or more print servers will appear in the list (the default node names are BRN_xxxxxx, where xxxxxx is the last six digits of the Ethernet address (MAC address)). You can find the node name and MAC address by printing out the printer settings page. Refer to the Quick Setup Guide for information on how to printer the settings page on your print server. 4 Select the print server that you wish to configure and double click it. You will be asked for a password. The default password is access. 5 Select the NetWare tab. If necessary change the Print Server Name. The default NetWare print server name will usually be BRN_xxxxxx_P1 where xxxxxx is the Ethernet address of the print server. Be careful! Changing the name may impact the configuration of other protocols because the print server service names will be altered. a If it is not already selected, select Queue Server as the operating mode. b Click the Change Bindery Queues button. c Select the NetWare server which you wish to configure. d Select the New Queue button and type in the queue name which you wish to create. e Once you have done that highlight the queue name you created and click on the Add button. f Click on Close and then OK. Now exit the BRAdmin application. You are ready to print. 6 - 7 NOVELL NETWARE PRINTING