Brother International BAS-610 Instruction Manual - English - Page 23
Forward/backward
View all Brother International BAS-610 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
6. The carriage feed advances 40 mm after the flap sensor detects the flap edge. The BOBBIN COUNTER DISPLAY shows "40.0" as the distance of travel after detecting the material edge. 7. Operate CARRIAGE FEED FORWARD/BACKWARD switch 0 to move the carriage feed so that the flap edge is at the sewing start needle position. The carriage feed can be moved in 0.2 mm steps. 8. Press BOBBIN COUNTER - SET switch 0 after adjusting the sewing start position. The carriage feed will return to the home position and the correction data shown on the BOBBIN COUNTER display will be stored. If EMERGENCY STOP switch 0 is pressed without pressing BOBBIN COUNTER - SET switch 0 , the carriage feed will return to the home position but the correction data will remain unmodified. 9. Set MODE switch 0 to any position but PROGRAM to store the program. * The modified program will be stored if MODE selector 0 is moved to any position but PROGRAM. The seam length will remain unchanged if the power switch is set to OFF without this operation. * If the only change to be made is right or left flap selection, steps 4 to 8 can be skipped. EMERGENCY STOP CARRIAGE FEED FORWARD 40mm 1 BOBBIN COUNTER SET I -19-