Brother International BE-1201B-AC Maintenance Schedule - English - Page 6
Greasing, Oiling
View all Brother International BE-1201B-AC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
BAS-416,416A,1210 BE-901,916,1201,1216 For Technical Assistance Please Call Toll Fre e 1-877-4BROTHER Email: [email protected] Website: http://www.brother-usa.com/industembroidery/tech_down.aspx 6 Month Maintenance Greasing Oiling Presser Foot Assembly 1. Color change the machine to needle number 1. Apply black grease (BR2) to the grooves of the presser foot guide plate for the guide bracket and retracting lever as indicated by the arrows. X sensor eccentric bushing 1. Remove the 8 screws holding on the cover and remove. 2. Lubricate eccentric bushing with a few drops of oil to the slot as indicated by the arrow. 3. Install the cover. Note: Make sure that the wires that run up to the control panel through the right had side of the cover are installed into the notch for them in the cover and not pinched by the cover. 9/1/05 6