Brother International BE-1201B-AC Version Upgrade - English - Page 2
Installation of the disk 2 starts. When there are four version upgrade floppy
View all Brother International BE-1201B-AC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
7. After the screen displays as follows, insert the setup disk, and press . 8. Installation of the setup disk starts. After the installation of the setup disk has completed, the screen displays as follows. Insert the disk 1, and press . 10. If the message shown below appears on the screen, there is possibility that the disk 1 for different model has been inserted. Check it, insert the correct FD if it is wrong, and press . 11. Installation of the disk 1 starts. 12. After the installation of the disk 1 has completed, the screen displays as follows. Insert the disk 2, and press . 13. Installation of the disk 2 starts. When there are four version upgrade floppy disks in a set, the screen displays as follows after the installation of the disk 2 has completed. Insert the disk 3, and press . When there are three floppy disks in a set, move on to STEP 16. 2