Brother International BE-1204C Cap to Tubular - English - Page 1
Brother International BE-1204C Manual
 |
View all Brother International BE-1204C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
BE-1204, 1206 For Technical Assistance Please Call Toll Free 1-877-4BROTHER Email: [email protected] Website: http://www.brother-usa.com/industembroidery/tech_down.aspx With the power to the machine OFF. 1. Remove the black thumbscrews. 2. Hold up the cap frame sash and remove it from the positioning pins by moving slightly forward. Positioning Pin 3. Open the two fixed levers and move the fixing pins to the outside to take them out from the pantograph. 4. Remove the cap driver from the bed and fix the cap frame sash with the black thumbscrews, removed in step 1, for storage. Outside Open 5. Install tubular arms. Flip mode switch on machine to FLATS. Turn power on. 1 3/10/05
-
1 -
2
 |
 |
3/10/05
1
With the power to the machine
OFF
.
1.
Remove the black thumbscrews.
3.
Open the two fixed levers and move the fixing
pins to the outside to take them out from the
pantograph.
5.
Install tubular arms. Flip mode switch on
machine to FLATS. Turn power on.
2.
Hold up the cap frame sash and remove it from the
positioning pins by moving slightly forward.
4.
Remove the cap driver from the bed and fix the cap
frame sash with the black thumbscrews, removed in
step 1, for storage.
For Technical Assistance Please Call Toll Free
1-877-4BROTHER
Email:
Website
BE-1204, 1206
Positioning Pin
Open
Outside