Brother International BE-1206B Cap to Tubular - English - Page 2

BE-1204C Tubular Positions There are 3 tubular mounting positions depending on what hoop size you are using. On each side of the tubular arms are numbers 1-3. If for example you are using small tubular hoops you would use position number 1 on both tubular arms. This is the numbered slot on the tubular arm that will go under the pair of thumbscrews for each head on the pantograph. Only the left tubular arm moves to a different position. The right one is fixed. To adjust the tubular arms on the connecting plate just remove the small thumbscrew on the left hand side and remove that tubular arm. Insert the number 1 slot of the right tubular arm underneath the pantograph thumbscrew on the right. Install the left tubular arm so that the number 1 slot is underneath the pantograph thumbscrew on the left. This will align the left tubular arm with the correct positioning pins on the connecting plate. Install small thumbscrew to secure left tubular arm to the connecting plate. Tighten both thumbscrews on pantograph to secure the tubular attachment. Photos of each position are as follows: Small Thumbscrew Pantograph Thumbscrews Position 1 Position 2 Position 3 2 3/10/05