Brother International BE-438F Instruction Manual - English - Page 54
List of memory switches, 1: Off for KE-430F and ON for BE-438F.
View all Brother International BE-438F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
6. USING THE OPERATION PANEL (ADVANCED OPERATIONS) 6-2. List of memory switches No. Setting range Setting items Work clamp/button clamp lift timing when sewing is complete 001 OFF 1 Does not lift automatically. Lifts at the final stitch position. 2 Lifts after moving to the home position. Sewing start speed The sewing speed for the first 1 - 5 stitches is set by memory switch nos. 151 - 100 OFF 155. (Refer to the Service Manual for details of memory switch nos. 151 - 155.) ON The speed increases slowly. The slow start pattern can be selected in program mode. Single-stitch test feed 200 OFF Test feed starts when the foot switch is depressed, and it continues automatically until the final stitch. Test feeding is carried out stitch by stitch when the foot switch is depressed. ON In addition, when the test indicator is illuminated, test feeding will move forward one stitch at a time when the machine pulley is turned by hand. Production counter display 300 OFF Lower thread counter display ON Production counter display Button hole distance display (*2) 401 OFF X-scale and Y-scale will be displayed as pattern outer dimensions (mm). ON X-scale and Y-scale will be displayed as button hole distances (mm). X-scale/Y-scale mm display (*3) 402 OFF Displayed as %. ON Displayed as mm. Display for program numbers 1 to 89 (1 to 64 for BE-438) 404 OFF Program numbers 1 to 89 (1 to 64 for the BE-438) are skipped during program number selection operations so that these numbers cannot be selected. (*4) ON Program numbers 1 to 89 (1 to 64 for the BE-438) are displayed during program number selection operations. Cycle program numbers (C01 to C30) 405 OFF Cycle program numbers are skipped during program number selection operations so that these numbers cannot be selected. ON Cycle program numbers are displayed during program number selection operations. Program numbers switched by F keys 0 When the F1 to F4 keys are pressed, operation switches to program numbers 1 to 4. 1 When the F1 to F4 keys are pressed, operation switches to program numbers 201 to 204. 406 2 When the F1 to F4 keys are pressed, operation switches to cycle program numbers C01 to C04. When the F1 to F4 keys are pressed, operation switches to the program number which has been pre-assigned to the respective key. 3 Assignment to F1 key: Memory switch No. 407 Assignment to F2 key: Memory switch No. 408 Assignment to F3 key: Memory switch No. 409 Assignment to F4 key: Memory switch No. 410 Default 1 ON *1 OFF OFF OFF ON ON 0 *1: Off for KE-430F and ON for BE-438F. *2: The setting is enabled when memory switch No. 402 is set to "ON" and (for the BE-438F) when pattern No. 1 to No. 64 (button hole data) is selected. *3: The mm display may differ slightly from the actual sewing size. *4: If none of program numbers 200 to 999 or cycle program numbers C01 to C30 have been programmed, this setting is invalid. (Operation occurs as though the setting is 'ON'.) 45 KE-430F, BE-438F