Brother International BES-1216 Maintenance Schedule - English
Brother International BES-1216 Manual
View all Brother International BES-1216 manuals
Add to My Manuals
Save this manual to your list of manuals |
Brother International BES-1216 manual content summary:
- Brother International BES-1216 | Maintenance Schedule - English - Page 1
.com Website: http://www.brother-usa.com/industembroidery/tech_down.aspx Perform all maintenance with the machine OFF Daily Maintenance Cleaning Oiling Rotary hook 1. Open bobbin case cover and remove bobbin case. Use brush to remove lint build up in and around rotary hook. Compressed air may - Brother International BES-1216 | Maintenance Schedule - English - Page 2
aspx Weekly Maintenance Oiling Needle Bars 1. Remove the front plate that has the "BROTHER" logo on it by removing one screw and loosening the other. The plate part that can keep extra oil is incorporated into the machine front oil tank, so that even with no oil tank, oil can be supplied to the - Brother International BES-1216 | Maintenance Schedule - English - Page 3
.com Website: http://www.brother-usa.com/industembroidery/tech_down.aspx Monthly Maintenance Cleaning Knives 1. Remove the two screws and remove the needle plate. Control Box 1. Use a brush to clean fan inlet and vents on sides control box. 2. Clean any thread and lint around the moving and - Brother International BES-1216 | Maintenance Schedule - English - Page 4
Email: [email protected] Website: http://www.brother-usa.com/ manually. Some models will be on the other side. 2. Apply black grease (BR2) to the roller bearings. Apply grease lightly since excess grease may contaminate the color change sensor on some models. Color change the machine - Brother International BES-1216 | Maintenance Schedule - English - Page 5
Toll Fre e 1-877-4BROTHER Email: [email protected] Website: http://www.brother-usa.com/industembroidery/tech_down.aspx 6 Month Maintenance the two grooves of the linear rails on boththe left and right side of the machine. 2. Apply white grease (30) to the two grooves of the linear rail its - Brother International BES-1216 | Maintenance Schedule - English - Page 6
.com Website: http://www.brother-usa.com/industembroidery/tech_down.aspx 6 Month Maintenance Greasing Oiling Presser Foot Assembly 1. Color change the machine to needle number 1. Apply black grease (BR2) to the grooves of the presser foot guide plate for the guide bracket and retracting lever as
9/1/05
1
Perform all maintenance with the machine OFF
Daily Maintenance
Cleaning
Oiling
Rotary hook
1.
Open bobbin case cover and remove bobbin case.
Use brush to remove lint build up in and around
rotary hook. Compressed air may also be used.
2.
Insert bobbin case in to rotary hook. Make sure
bobbin thread is not over 2 inches long. Close
bobbin case cover.
Rotary hook
1.
Rotate the pulley or degree wheel backwards so
that 50 degrees is at the top.
2.
Open the bobbin case cover.
Place a small drop of
oil on the raceway as indicated by the arrow. Oil
rotary hook every 3-4 hours of operation.
3. Close bobbin case cover.
4.
Rotate pulley in the direction of the arrow or
forward to stop position, 100 degrees.
For Technical Assistance Please Call Toll Free
1-877-4BROTHER
Email:
Website
:
B
B
A
A
S
S
-
-
4
4
1
1
6
6
,
,
4
4
1
1
6
6
A
A
,
,
1
1
2
2
1
1
0
0
B
B
E
E
-
-
9
9
0
0
1
1
,
,
9
9
1
1
6
6
,
,
1
1
2
2
0
0
1
1
,
,
1
1
2
2
1
1
6
6