Brother International BES-1216 Maintenance Schedule - English - Page 6

9/1/05

6

6 Month Maintenance

Greasing

Oiling

Presser Foot Assembly

1.

Color change the machine to needle number 1.

Apply black grease (BR2) to the grooves of the

presser foot guide plate for the guide bracket and

retracting lever as indicated by the arrows.

X sensor eccentric bushing

1.

Remove the 8 screws holding on the cover and

remove.

2.

Lubricate eccentric bushing with a few drops of oil

to the slot as indicated by the arrow.

3. Install the cover.

Note: Make sure that the wires that run up to the

control panel through the right had side of the cover are

installed into the notch for them in the cover and not

pinched by the cover.

For Technical Assistance Please Call Toll Free

1-877-4BROTHER

Email:

[email protected]

Website

:

http://www.brother-usa.com/industembroidery/tech_down.aspx

B

B

A

A

S

S

-

-

4

4

1

1

6

6

,

,

4

4

1

1

6

6

A

A

,

,

1

1

2

2

1

1

0

0

B

B

E

E

-

-

9

9

0

0

1

1

,

,

9

9

1

1

6

6

,

,

1

1

2

2

0

0

1

1

,

,

1

1

2

2

1

1

6

6

Brother International BES-1216 Maintenance Schedule - English - Page 6

Greasing, Oiling

Page 6 highlights