Brother International BES-1216 Color Change Potentiometer Replacement - Englis - Page 2

Unplug the old color change potentiometer by following the cable out of the potentiometer and unplugging at the connector. Connector Remove the mounting bracket from the old color change potentiometer with a wrench and install on the new potentiometer in the same orientation as the old one. Mounting Bracket Plug the new color change potentiometer into the connector but do not connect mechanically to the machine. Press and hold the up arrow, on the panel while turning on the machine. Continue to hold up arrow down until a menu is displayed asking you to confirm going into test mode. Press the to go into the test mode. It will then ask you for a password. Input and press the key. Select the icon with the or jog key and press the key. Select the icon with the or jog key and press the key. The following screen will be displayed. Turn the shaft sticking out of the potentiometer slowly until you get a reading of 19 on the potentiometer level on the display. The machine will also start beep continuously when the number 19 is displayed. 2