Brother International BES-1262 Wiper Problems and Solutions - English - Page 3
Wiper comes down but does not retract
View all Brother International BES-1262 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
Wiper comes down but does not retract • Slot in thread guide solenoid bracket base needs to be lubricated. Apply black grease in the shaded area of the Wiper Assembly Parts Breakdown. • Magic tapes in thread presser base assembly are either missing or damaged. (See Wiper Assembly Parts Breakdown) • Thread presser base misadjusted or bent. (See checking thread presser base and cover alignment) • Spring is stretched, missing or not hooked correctly. (See Wiper Assembly Parts Breakdown) • Nut on positioning spacer, B is either loose or missing. Apply thread adhesive to thread to prevent nut from coming off. (See Wiper Assembly Parts Breakdown) • Thread guide solenoid bracket base is misaligned or scratched at the bottom of the slot. (See checking thread guide solenoid base) • Lower arm cushion is cracked, missing or the screw has broken off causing the positioning spacer, B to damaged the bottom of the thread guide solenoid bracket base. (See Wiper Assembly Parts Breakdown) • Bent presser foot • Wiper holder plate is bent or not adjusted correctly. (See checking wiper holder plate) Wiper comes down and retracts but does not grab the upper thread. • Nut on positioning spacer, B is either loose or missing. (See Wiper Assembly Parts Breakdown) • Upper thread guide hook is not adjusted correctly. (See Wiper holder plate adjustment) 3