Brother International BRT-MFC-7840W Network User Guide - Page 125
Network print software installation problems
UPC - 001250262064
View all Brother International BRT-MFC-7840W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 125 highlights
Troubleshooting Windows Vista® users: 13 a Click the Start button, Control Panel, Network and Internet, Windows Firewall and click Change settings. b When the User Account Control screen appears, do the following. Users who have administrator rights: Click Continue. For users who do not have administrator rights: Enter the administrator password and click OK. c Click the General tab. Make sure that Off (not recommended) is selected. d Click OK. Note After the Brother software package is installed, enable your Firewall again. For Macintosh® Choose your machine again in the DeviceSelector application located in Mac OS X or Macintosh HD (Startup Disk)/Library/Printers/Brother/Utilities/DeviceSelector or from the model pull-down list of ControlCenter2. Network print software installation problems 13 The Brother print server is not found during the setup of the network print software or from the installation of the printer driver of the Brother machine in Windows®. The Brother print server is not found using the Simple Network Configuration capabilities of Mac OS® X. 13 For a network with an Ethernet cable connection Make sure you have completed the IP address setting of the Brother print server according to Chapter 2 13 of this User's Guide before installing the network print software or printer driver. For a wireless network Make sure you have completed the IP address setting and wireless network settings of the Brother print server according to Chapter 3 of this User's Guide before installing the network print software or printer driver. Check the following: a Make sure that the machine is powered on, is on-line and ready to print. b For wired network users: Check to see if there is any LED activity. Brother print servers have two LEDs on the back panel of the machine. The upper orange LED shows Speed status. The lower green LED shows Link/Activity (Received/Transmit) status. The upper LED is orange: The Speed LED will be orange if the print server is connected to a 100BASE-TX Fast Ethernet network. 116