Brother International CE4400 Operation Manual - Page 95
while sewing.
View all Brother International CE4400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
Symptom Possible cause How to put it right Reference The fabric is wrinkled. The presser foot you are using is not appropriate for the type of stitch that you want to sew. The thread tension is incorrect. Attach the presser foot that is correct for the type of stitch that you want to sew. Adjust the tension of the upper thread. page 73 page 41, 85 You have not threaded the upper thread properly. Correct the upper threading. page 22 Stitches are skipped. You have not used the right combination of fabric, thread and needle. The needle is bent or blunt. The needle is incorrectly installed. Choose a thread and needle that are appropriate for the type of fabric. Replace the needle. Correctly install the needle. page 28 page 29 Dust has accumulated under the Remove the needle plate cover and needle plate or in the bobbin case. clean the plate and the bobbin case. page 78 Dust has built up in the feed dogs or Remove the needle plate cover and in the bobbin case. clean the plate and the bobbin case. page 78 You have not threaded the upper thread properly. Correct the upper threading. page 22 There is a high- pitched noise while sewing. The bobbin case is scratched. Replace the bobbin case. Contact your retailer or the nearest authorized service center. - 4 You have not used bobbin that has been designed for this machine. Incorrect bobbins will not work properly. Only use a bobbin that has been designed for this machine. page 14 The feed dogs are lowered. Slide the feed dog position lever to . page 55, 65 The stitch is too fine. Lengthen the stitch length. page 38 You have not used the right combination of fabric, thread and needle. Choose a thread and needle that are appropriate for the type of fabric. page 28 The fabric does not feed. The thread is tangled, for example, in the bobbin case. The presser foot you are using is not appropriate for the type of stitch that you want to sew. Remove the tangle thread. If the thread is tangled in the bobbin case, clean the bobbin case. Attach the presser foot that is correct for the type of stitch that you want to sew. page 78, 82 page 73 The needle is bent or blunt. Replace the needle. page 29 Zigzag foot "J" is slanted on a thick seam at the beginning of stitching. Use the presser foot locking pin (black button on the left side) on zigzag foot "J" to keep the presser foot level while sewing. page 43 The fabric feeds in the opposite The feed mechanism is damaged. direction. Contact your retailer or the nearest authorized service center. - 93