Brother International CP-6500 Users Manual - English - Page 90
otherwise the upper thread may become
View all Brother International CP-6500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
APPENDIX Insert the bobbin case so that the U mark on p the bobbin case aligns with the { mark on the race. Check the condition of the needle, and then r install it. If the needle is in a poor condition, for example, if it is bent, be sure to install a new needle. • Refer to "Checking the needle" (page 29) and "Replacing the needle" (page 29). CAUTION ● Never use bent needles. Bent needles can easily break, possibly resulting in injuries. • Align the U and { marks. Note ● After completing this procedure, continue with the following procedure in "Checking machine operations" to check that the machine is operating correctly. Memo ● Since the needle may have been damaged when the fabric was caught in the machine, we recommend replacing it with a new one. a U mark b { mark c Bobbin case • Make sure that the indicated points are aligned before installing the bobbin case. CAUTION ● Never use a bobbin case that is scratched, otherwise the upper thread may become tangled, the needle may break or sewing performance may suffer. For a new bobbin case (part code: XE7560-001), contact your nearest authorized service center. ● Make sure that you fit the bobbin case properly, otherwise the needle may break. Attach the needle plate cover according to q steps h and i in "Cleaning the bobbin case" (page 79 and 80). 88