Brother International CS9100 Operation Manual - Page 13
Changing the initial needle, position, Cancelling the operation beep, for models equipped with the,
View all Brother International CS9100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Changing the initial needle Cancelling the operation beep position (for models equipped with the Normally, the straight stitch (left needle position) is automatically selected when the sewing machine is operation beep) When the sewing machine is purchased, it is set to 1 turned on. The machine can be set so that the beep each time a key is pressed. This setting can be straight stitch (center needle position) is changed so that the machine does not beep. automatically selected when it is turned on. Turn off the sewing machine. a Turn off the sewing machine. a Hold down the "+" side of (stitch selection b key) on the left and turn on the sewing machine. After turning on the sewing machine, release the "+" side of (stitch selection key). Hold down the "-" side of (stitch width b adjustment key) and turn on the sewing machine. After turning on the sewing machine, release the "-" side of (stitch width adjustment key). X The initial needle position changes to the center needle position. Memo ● The specified initial needle position is maintained even after the machine is turned off. ● Perform the same operation to change the initial needle position to the left needle position. X The machine is now set so that it will not beep. 11