Brother International DCP-8085DN Service Manual - Page 96
Error code 84
UPC - 012502622703
View all Brother International DCP-8085DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
■ Error code 84 Jam Rear Open the Back Cover and remove the jammed paper, then press Start. Paper jam User Check • Check if the paper is jammed around the opened back cover. If jammed, remove it. Step 1 2 3 4 Cause Remedy Harness connection failure of relay Check the harness connection of the relay rear PCB ASSY. rear PCB ASSY and reconnect it. Eject actuator catching on some Correct catching of the eject actuator. position Paper eject sensor PCB failure Check the sensor performance following the procedure described in "Maintenance mode 32". If any problem occurs, replace the relay rear PCB ASSY. Main PCB failure Replace the main PCB ASSY. ■ Error code 85 No Tray A Tray is not detected, install Tray 1. Tray 1 is not installed into the machine Error code 86 No Tray A Tray is not detected, install Tray 2. Tray 2 is not installed into the machine User Check • Check if the applicable tray is installed into the machine. • Check if the paper is jammed in the applicable tray. Step 1 Cause T1 PE/edge sensor PCB/ T2 PE/edge sensor PCB failure Harness connection failure of 2 T1 PE/edge sensor PCB/ T2 PE/edge sensor PCB. 3 Main PCB failure 4 Connector 55533-1219 failure (only Tray 2) Remedy Check the sensor performance following the procedure described in "Maintenance mode 32". If any problem occurs, replace the T1 PE/edge sensor PCB failure/T2 PE/ edge sensor PCB. Check the harness connection of the T1 PE/edge sensor PCB/T2 PE/edge sensor PCB. and reconnect it. Replace the main PCB ASSY. Replace the connector 55533-1219. 3-24 Confidential