Brother International DCP-8085DN Quick Setup Guide - English - Page 5
Release the scanner lock, 5 Connect the power cord, 6 Choose your language (If needed), 7 Set
UPC - 012502622703
View all Brother International DCP-8085DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
4 Release the scanner lock a Push the lever a in the direction shown to unlock the scanner. (The gray scanner lock lever is located at the back left side, under the document cover b.) 2 6 Choose your language (If needed) a Press Menu. b Press 1. c Press 0. d Press or language. Press OK. e Press Stop/Exit. to choose your 1 5 Connect the power cord IMPORTANT DO NOT connect the interface cable yet. a Make sure that the machine power switch is off. Connect the AC power cord to the machine. 7 Set the LCD contrast (If needed) If you are having difficulty reading the LCD, try changing the contrast setting. a Press Menu. b Press 1. c Press 5. d Press to increase the contrast. -OR- Press to decrease the contrast. Press OK. e Press Stop/Exit. b Plug the AC power cord into an AC outlet. Turn the power switch on. Note If Scanner Locked appears on the LCD, immediately release the scanner lock and press Stop/Exit. (See Release the scanner lock on page 5.) 5