Brother International DCP-L2540DW Basic Users Guide - Page 64
Error Message, Cause, Action, Stop/Exit, Self-Diagnostic, Size Error DX, Size mismatch, Toner Ended
View all Brother International DCP-L2540DW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
Error Message Self-Diagnostic Size Error DX (For automatic 2-sided printing models) Size mismatch Toner Ended Toner Low Cause Action The temperature of the fuser unit does not rise to a specified temperature within the specified time. The fuser unit is too hot. • (MFC-L2680W/MFC-L2685DW/ MFC-L2700DW/MFC-L2705DW/ MFC-L2707DW) To prevent you from losing the received fax data in the machine's memory, transfer the data to another Fax machine or to your computer before turning off the machine. • Press and hold to turn off the machine, wait a few seconds, and then turn it on again. Leave the machine idle for 15 minutes with the power on. The paper size specified in the printer driver and the machine's menu are not available for automatic 2sided printing. Press Stop/Exit. Choose a paper size supported by 2-sided printing. Paper sizes available for automatic 2sided printing are Letter, Legal and Folio. The paper in the tray is not the correct size and is not available for automatic 2sided printing. Load the correct size of paper in the tray and set the tray for that paper size. Paper sizes available for automatic 2sided printing are Letter, Legal and Folio. The paper in the tray is not Load the correct size of paper in the the correct size. tray and set the size of paper to the tray. The toner cartridge is at the Replace the toner cartridge with a end of its life. new one. If the LCD displays this message you can still print. The toner cartridge is near the end of its life. Order a new toner cartridge now so you have it ready when the LCD displays Replace Toner. A Troubleshooting 51