Brother International DCP-L5650DN Drum Unit Replacement Guide - Page 4
Reset The Drum Unit Counter, Setzen Sie Den ZÄhler Der Trommeleinheit Zurück, RÉinitialisez Le
View all Brother International DCP-L5650DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
5 [ English ] RESET THE DRUM UNIT COUNTER Make sure the machine is turned on. (1) Make sure that the front cover is open. (2)Press and hold OK for about two seconds to display Drum Unit, and then press OK. (3) Press a to select Reset. (4) Close the front cover. (1) Close the front cover. (2)Press to interrupt the error. (3) (For HL Models) Press (Settings) > Machine Information > Parts Life. (For DCP and MFC Models) Press (Settings) > All Settings > Machine Info. > Parts Life. (4) (For HL Models) Press Drum Life until the Touchscreen message changes, and then press Yes. (For DCP and MFC Models) Press Drum until the Touchscreen message changes, and then press Yes. (5)Press . Finish Go to http://www.brother.com/original/index.html for instructions on how to return your used supplies to the Brother collection program. If you choose not to return used supplies, please discard them according to local regulations, keeping them separate from domestic waste. If you have questions, call your local waste disposal office. 5 [ Deutsch ] Setzen Sie den ZÄHLER DER TROMMELEINHEIT zurück Stellen Sie sicher, dass das Gerät eingeschaltet ist. (1) Stellen Sie sicher, dass die vordere Abdeckung geöffnet ist. (2)Halten Sie OK ungefähr zwei Sekunden lang gedrückt, bis Trommel angezeigt wird. Drücken Sie dann OK. (3)Drücken Sie a, um Reset auszuwählen. (4) Schließen Sie die vordere Abdeckung. (1) Schließen Sie die vordere Abdeckung. (2)Drücken Sie , um den Fehler abzubrechen. (3)(HL-Modelle) Drücken Sie (Einst.) > Geräteinformationen > Lebensdauer. (DCP- und MFC-Modelle) Drücken Sie (Einstell.) > Alle Einstell. > Geräte-Info > Teilelebensdauer. (4) (HL-Modelle) Drücken Sie Trommel Lebensd., bis die Meldung im Touchscreen wechselt, und drücken Sie dann Ja. (DCP- und MFC-Modelle) Drücken Sie Trommel, bis die Meldung im Touchscreen wechselt, und drücken Sie dann Ja. (5)Drücken Sie . Fertig Unter http://www.brother.com/original/index.html finden Sie Anweisungen, wie Sie die Verbrauchsmaterialien im Rahmen des Brother Recyclingprogramms zurücksenden können. Wenn Sie sich gegen die Rücksendung der Verbrauchsmaterialien entscheiden, entsorgen Sie die Verbrauchsmaterialien gemäß den örtlichen Bestimmungen getrennt vom normalen Hausmüll. Wenn Sie Fragen haben, wenden Sie sich an Ihren örtlichen Wertstoffhof. 5 [ Français ] RÉINITIALISEZ LE COMPTEUR DU TAMBOUR Assurez-vous que l'appareil est sous tension. (1) Assurez-vous que le capot avant est ouvert. (2)Maintenez la touche OK enfoncée pendant environ deux secondes pour afficher l'option Tambour, puis appuyez sur OK. (3)Appuyez sur a pour sélectionner Init.. (4) Fermez le capot avant. (1) Fermez le capot avant. (2)Appuyez sur pour mettre fin à l'erreur. (3)(Pour les modèles HL) Appuyez sur (Param (Param.) ) > Infos appareil (Info appareil) > Durée de vie pièces (Vie pièces). (Pour les modèles DCP et MFC) Appuyez sur (Param) > Ts paramètres (Ts réglages) > Info. appareil (Info. machine) > Durée de vie des pièces. (4) (Pour les modèles HL) Appuyez sur Vie du tambour (Vie tambour) jusqu'à ce que le message de l'écran tactile change, puis appuyez sur Oui. (Pour les modèles DCP et MFC) Appuyez sur Tambour jusqu'à ce que le message de l'écran tactile change, puis appuyez sur Oui. (5)Appuyez sur . Terminer Voir http://www.brother.com/original/index.html pour savoir comment retourner vos consommables usagés dans le cadre du programme de collecte Brother. Si vous ne renvoyez pas votre consommable, mettez-le au rebut conformément aux réglementations locales en vigueur, en le séparant des ordures ménagères. Si vous avez des questions, appelez les autorités locales compétentes en la matière. - 3 -