Brother International DS-640 Quick Setup Guide - Page 3

Product Safety Guide Failure to follow these instructions may result in an increased risk of personal injury or damage to property, including through fire, electrical shock, burns or suffocation. Symbols and conventions used in the documentation The following symbols and conventions are used throughout the documentation. DANGER DANGER indicates an imminently hazardous situation which, if the product is handled without following the warnings and instructions, will result in death or serious injuries. WARNING WARNING indicates a potentially hazardous situation which, if not avoided, could result in death or serious injuries. CAUTION CAUTION indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injuries. IMPORTANT IMPORTANT indicates a potentially hazardous situation which, if not avoided, may result in damage to property or loss of product functionality. NOTE Notes tell you how you should respond to a situation that may arise or give tips about how the operation works with other features. Prohibition icons indicate actions that must not be performed. This icon indicates that flammable sprays may not be used. This icon indicates that organic solvents, alcohol, or other liquids may not be used. Electrical Hazard icons alert you to possible electrical shock. Fire Hazard icons alert you to the possibility of fire. Follow all warnings and instructions marked on the machine. Compilation and Publication Under the supervision of Brother Industries, Ltd., this manual has been compiled and published, covering the latest product descriptions and specifications. The contents of this manual and the specifications of this product are subject to change without notice. Brother reserves the right to make changes without notice in the specifications and materials contained herein and shall not be responsible for any damages (including consequential) caused by reliance on the materials presented, including but not limited to typographical and other errors relating to the publication. Choosing a location Put your machine on a flat, level, stable surface that is free of vibration and shocks, such as a desk. Choose a location where the temperature remains between 41 °F and 95 °F (5 °C and 35 °C) and the humidity is between 20 to 80% (without condensation). 3