Brother International DZ3400 Operation Manual - Page 16
Power supply, Foot controller
View all Brother International DZ3400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
KNOWING YOUR SEWING MACHINE Power supply Insert the plug into a wall outlet. a Foot controller Insert the foot controller plug into its jack/socket on the rear side of the sewing machine. 12 a Main power switch b Jack/socket connector Set the main power switch to "I". b X The sewing light comes on when the machine is turned on. Memo ● When the machine is turned on, the needle and the feed dogs will make sound when they move; this is not a malfunction. To turn off the machine, set the main power c switch to "{". X The sewing light goes off when the machine is turned off. Note ● If a power outage occurs while the sewing machine is being operated, turn off the sewing machine and unplug the power supply cord. When restarting the sewing machine, follow the necessary procedure to correctly operate the machine. (For U.S.A. only) ● This appliance has a polarized plug (one blade wider than the other). To reduce the risk of electric shock, this plug is intended to fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet. Do not modify the plug in any way. a Foot controller jack/socket CAUTION ● When connecting the foot controller, be sure to turn off the sewing machine in order to prevent the machine from accidentally being started. When you press the foot controller down lightly, the machine will run at a low speed. When you press harder, the machine's speed will increase. When you take your foot off the foot controller, the machine will stop. Slower Faster You should make sure that nothing is placed on the foot controller when the machine is not in use. CAUTION ● Do not allow pieces of cloth and dust to build up on the foot controller. Doing so could cause a fire or an electric shock. Note ● When the foot controller is plugged in, the start/stop button cannot be used to start sewing (only for models equipped with the start/stop button). 14