Brother International HL 1250 Users Manual - English - Page 74
Install the drum unit assembly into the printer
UPC - 012502525837
View all Brother International HL 1250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
5. Clean the primary corona wire inside the drum unit by gently sliding the tab to the right hand end and left hand end several times. Home Position (v) Fig. 3-22 Cleaning the primary corona wire 6. Return the tab to the home position (v mark position) before reinstalling the drum unit assembly into the printer. ! Caution Be sure to position the tab at the home position, or printed pages may have vertical stripes. 7. Install the drum unit assembly into the printer. See the section "How to replace the Drum unit" earlier in this Chapter. 8. Close the front cover. 9. Plug in the power cord and turn on the power switch. 3-18
3-18
5
.
Clean the primary corona wire inside the drum unit by gently sliding the tab to the
right hand end and left hand end several times.
Fig. 3-22
Cleaning the primary corona wire
6
.
Return the tab to the home position (
▲
mark position) before reinstalling the drum
unit assembly into the printer.
!
Caution
Be sure to position the tab at the home position, or printed pages may have vertical
stripes.
7
.
Install the drum unit assembly into the printer.
See the section “How to replace the Drum unit” earlier in this Chapter.
8
.
Close the front cover.
9
.
Plug in the power cord and turn on the power switch.
Home Position (
▲
)