Brother International HL-1260 Users Manual - English - Page 166
in order in the upper sockets., If you have installed the SIMMs incorrectly
View all Brother International HL-1260 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 166 highlights
USER'S GUIDE 7. Install as many SIMMs as you need. • Set a SIMM into the slot at an angle. • Push the tip gently towards the vertical until it clicks into place. Notes • When you install less than two SIMMs, be sure to install them in the order of slots 1and 2. • When you install different capacities of SIMMs, be sure to install the larger capacity SIMMs in the lower socket and smaller capacity SIMMs in order in the upper sockets. Slot 2 Fig. 5-8 Installing the SIMMs SIMM Slot 1 8. Refit the metal plate and secure it with the screws. 9. Refit the left side cover to the printer. 10. Plug in the power cord and turn on the printer. If you have installed the SIMMs incorrectly, the printer prints a report to alert you. 5-10
USER’S GUIDE
5–10
7.
Install as many SIMMs as you need.
• Set a SIMM into the slot at an angle.
• Push the tip gently towards the vertical until it clicks into place.
Notes
•
When you install less than two SIMMs, be sure to install them in the
order of slots 1and 2.
•
When you install different capacities of SIMMs, be sure to install the
larger capacity SIMMs in the lower socket and smaller capacity SIMMs
in order in the upper sockets.
Fig. 5-8
Installing the SIMMs
8.
Refit
the metal plate and secure it with the screws.
9.
Refit the left side cover to the printer.
10. Plug in the power cord and turn on the printer.
If you have installed the SIMMs incorrectly, the printer prints a report to
alert you.
SIMM
Slot 1
Slot 2