Brother International HL-1650N Quick Setup Guide - English - Page 2

Follow the instructions for your interface cable and operating system. For Parallel interface cable users (For Windows® users only) Step 5 Connect the printer to your PC & Install the printer driver 1 Click "Connect the interface cable and install the printer driver / utilities". 2 Select the parallel interface cable. O I OFF ON 3 Turn the printer power switch off. 4 Connect the interface cable to your PC, and then connect it to the printer. O I OFF ON 5 Turn the printer power switch on. Note: If "Add New Hardware Wizard" appears, click the Cancel button. 6 Click the Next button. 7 Click the Finish button. The setup is now complete. For USB interface cable users (For Windows® users only) Step 5 Install the driver & Connect the printer to your PC For USB interface cable users (For Macintosh® users only) Step 5 Install the Driver & Connect the Printer to your Macintosh® Note: When the "Add New Hardware Wizard" appears on your PC, click the Cancel button. Note: Start installing the driver before you connect the USB interface cable to the printer. If you have already connected it, remove it. 1 Click "Connect the interface cable and install the printer driver / utilities". 2 Select the USB cable. 3 Click the Next button. O I OFF ON 4 Click the OK button. 5 Make sure the printer power switch is on. 6 Connect the USB interface cable to your PC, and then connect it to the printer. For Windows® 98/Me users: The setup is now complete. For Windows® 2000 users: Go to Step 6. Step 6 Setting your PC printer port (For Windows® 2000 users only) 1 Double-click the Printer Driver Installer icon, and then follow the instructions on the screen. 4 Open the Chooser from the Apple® menu on the Macintosh®. Control Panel 1 After your PC has restarted, click Start, Setting and Printers. 2 Select the Brother HL-1650/1670N series (copy2) icon. 3 Click on the File menu, and then select Set as Default printer. The setup is now complete. For Network users If you want to connect your printer using a Network cable, refer to the Quick Network Setup Guide. After the administrator has made the required settings, install the driver referring to the "Installing the Driver for Network users" section of the Quick Network Setup Guide. For HL-1650 user: Install the optional Network board (NC-4100h) referring to Chapter 4 of the printer. Data Back Reprint Set Job cancel Go For more information, see Chapter 3 "CONTROL PANEL" in the User's Guide. O I OFF ON 2 Make sure the printer power switch is on. 3 Connect the USB interface cable to your Macintosh®, and then connect it to the printer. 5 Click the HL-1650/1670N icon and select it. The setup is now complete. Data LED : Orange On Data remains in the printer buffer. Blinking Receiving or processing data. Off No remaining data. Switches Go Job Cancel Reprint Menu Set Back Exit from the control panel menu, reprint settings and clear error messages. Pause / Continue printing. Stop and cancel the printer operation in progress. Select the reprint menu. Move forward and backward through menus. Move forward and backward through selectable options. Select the control panel menu. Set the selected menus and the settings. Go back one level in the menu structure. Language Setting (Default setting is English) 1. Select the SETUP mode by pressing the + switch, and press the Set switch. 2. Check that the LANGUAGE message appears, and press the Set switch. 3. Choose your language by pressing the + or - switch, and press the Set switch. An asterisk mark (*) appears at the end of the display. (You can return to the READY status by pressing the Go switch.)