Brother International HL-1670N Network Users Manual - English - Page 38
Insert the leading edge of the paper first and push it gently into the tray.
View all Brother International HL-1670N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
☛ 3. Open the Face up output tray. ☛ 4. Fig. 1-19 Place envelopes in the Multi-purpose tray so they touch the back of the tray and remain below the limit mark. Fig. 1-20 ✒ Note When you place paper in the Multi-purpose tray, note the following: • If you will be printing on paper that weighs more than 135 g/m2 (36 lbs), use the face up output tray. • Insert the leading edge of the paper first and push it gently into the tray. • The top of the paper stack must be under the guides that are on both sides of the tray. The maximum thickness is 11 mm (or 0.43 inch). • The printed side must be face up. 1-28
1-28
☛
3.
Open the Face up output tray.
Fig. 1-19
☛
4.
Place envelopes in the Multi-purpose tray so they touch the back of the tray
and remain below the limit mark.
Fig. 1-20
✒
Note
When you place paper in the Multi-purpose tray, note the following:
•
If you will be printing on paper that weighs more than 135 g/m
2
(36 lbs),
use the face up output tray.
•
Insert the leading edge of the paper first and push it gently into the tray.
•
The top of the paper stack must be under the guides that are on both
sides of the tray. The maximum thickness is 11 mm (or 0.43 inch).
•
The printed side must be face up.