Brother International HL 1850 Quick Setup Guide - English - Page 2

Network Quick Setup Guide For HL-1850 users: If you are going to connect the printer to your network, purchase the optional Network board (NC-4100h). If you are going to connect the printer to your network, we recommend that you contact your system administrator prior to installation. If you are an Administrator: Configure your network printer settings referring to the following instructions. The default password for the print server is 'access'. You can use the BRAdmin Professional software or a web browser to change this password. Setting Your Language on the Control Panel To change the language settings of the printer do the following. READY Data Back Reprint Set Job cancel Go SETUP Back LANGUAGE Back =ENGL I SH * Back READY Go Set 1 Press the + button until SETUP is displayed. Press the Set button. Set Set 2 Press the Set button again. 3 Scroll through the available languages by pressing the + or - buttons. Press the Set button to accept the appropriate language. An asterisk mark (*) appears on the LCD. 4 Press the Go button to put the printer back into its READY state. For the Administrator (For Windows® Users Only) Install the BRAdmin Professional Configuration utility The BRAdmin Professional software is designed to manage your Brother network connected devices. For example, Brother network ready printers and Brother network ready Multifunction devices can be managed using the BRAdmin Professional software. The BRAdmin Professional software can also be used to manage devices from other manufacturers whose products support the SNMP (Simple Network Management Protocol). For more information on the BRAdmin Professional utility go to http://solutions.brother.com 1 Insert the CD-ROM into your CD-ROM drive. The opening screen will appear automatically. Follow the instructions on the screen. 2 Click the Install Software icon on the Menu screen. Network User's Guide Chapter Map To configure the print server refer to the Network User's Guide. 3 Click "BRAdmin Professional." Follow the instructions on the screen. Setting Your Printer IP Address and Subnet Mask (Using the Control Panel) To set the printer IP address using the printer control panel do the following. READY Data Back Reprint Set Job cancel Go NE TWORK Back TCP / I P Back I P ADDRESS= Back * 1 9 2 . 0 . 0 . 1 9 2 Back Set Set Set Set 1 Press the + button until NETWORK is displayed. Press the Set button. 2 Press the Set button again. TCP/IP ENABLE will be displayed. 3 Press the + button until IP ADDRESS= is displayed. Press the Set button. 4 Enter your IP address of the printer using the + and - buttons. Press the Set button to go to next digit. Press the Set button to complete the IP address. An asterisk mark (*) appears on the LCD. SUBNET MASK= Back * 0 . 0 . 0 . 0 Back READY Go Set 5 Press the + button until SUBNET MASK= is displayed. Press the Set button. Set 6 Enter your subnet mask settings in the same way that you entered the IP address. An asterisk mark (*) appears on the LCD. 7 Press the Go button to put the printer back into its READY state. For more information, refer to the Network User's Guide on the supplied CD-ROM or go to http://solutions.brother.com ©2002 Brother Industries, Ltd. ©1998-2002 TROY XCD Inc. ©1983-1998 PACIFIC SOFTWORKS INC. ALL RIGHTS RESERVED Windows and Windows NT are registered trademarks of Microsoft Corporation in the U.S. and other countries. HP, HP/UX, JetDirect and JetAdmin are trademarks of Hewllet-Packard Company. UNIX is a trademark of UNIX Systems Laboratories. Adobe PostScript and PostScript3 are trademarks of Adobe Systems Incorporated. Netware is a trademark of Novell, Inc. Apple Macintosh, iMac, LaserWriter, and AppleTalk are trademarks of Apple Computer, Inc. All other brand and product names are trademarks or registereted trademarks of their respective holders. Windows® 95/98/Me Windows NT® Windows® 2000/XP UNIX/Linux Macintosh® OS2 Warp Server LAN Server Windows® Macintosh® Peer-to-Peer Brother Internet Print Netware Peer-to-Peer Brother Internet Print (NT® 4.0 only) Netware Peer-to-Peer (Windows® 2000 only) IPP (Internet Printing Protocol) Brother Internet Print Netware TCP/IP NetBIOS TCP/IP IPX/SPX TCP/IP NetBIOS DLC/LLC TCP/IP IPX/SPX TCP/IP NetBIOS DLC/LLC TCP/IP TCP/IP IPX/SPX TCP/IP AppleTalk TCP/IP TCP/IP NetBIOS Chapter 3 Chapter 4 Chapter 5 Chapter 6 Chapter 2 Chapter 4 Chapter 8 Chapter 5 Chapter 6 Chapter 2 Chapter 4 Chapter 8 Chapter 2 Chapter 5 Chapter 6 Chapter 1 Chapter 7 Chapter 7 Chapter 2 Chapter 4 Peer-to-Peer Printing NetBIOS Peer-to-Peer Printing How to Configure Internet Printing Novell Netware Printing TCP/IP Printing NetBIOS Peer-to-Peer Printing DLC Printing How to Configure Internet Printing Novell Netware Printing TCP/IP Printing NetBIOS Peer-to-Peer Printing DLC Printing TCP/IP Printing How to Configure Internet Printing Novell Netware Printing UNIX Printing Macintosh Printing Macintosh Printing TCP/IP Printing NetBIOS Peer-to-Peer Printing Print Configuration Page To print a configuration page, use a fine ball point pen to hold down the Network Test Button for less than 5 seconds. Factory Default Setting If you wish to reset the print server back to its default factory settings (resetting all information such as the password and IP address information), use a fine ball point pen to hold down the Network Test Button for more than 5 seconds. Test Button