Brother International HL-2220 User Guide - Page 98
Cleaning the paper pick-up roller, If the paper pick-up roller is dirty
UPC - 012502628040
View all Brother International HL-2220 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
Routine Maintenance i Open the front cover. Put the drum unit and toner cartridge assembly back into the machine. 4 j Put the paper tray firmly back in the machine. k Close the front cover. l Plug the machine's power cord back into the AC power outlet first, and then reconnect all cables. Turn on the machine's power switch. Cleaning the paper pick-up roller 4 If the paper pick-up roller is dirty, the machine may not feed paper. In that case, clean the paper pick-up roller as follows: a Turn off the machine's power switch. Disconnect all cables, and then unplug the power cord from the AC power outlet. b Pull the paper tray out of the machine. c Remove all the paper, and anything that is stuck inside, from the paper tray. 94
Routine Maintenance
94
4
i
Open the front cover. Put the drum unit and toner cartridge assembly back into the machine.
j
Put the paper tray firmly back in the machine.
k
Close the front cover.
l
Plug the machine's power cord back into the AC power outlet first, and then reconnect all cables. Turn
on the machine's power switch.
Cleaning the paper pick-up roller
4
If the paper pick-up roller is dirty, the machine may not feed paper. In that case, clean the paper pick-up roller
as follows:
a
Turn off the machine's power switch. Disconnect all cables, and then unplug the power cord from the AC
power outlet.
b
Pull the paper tray out of the machine.
c
Remove all the paper, and anything that is stuck inside, from the paper tray.