Brother International HL-3170CDW Quick Setup Guide - English - Page 21
Wireless Network, Windows, Macintosh - wireless setup
View all Brother International HL-3170CDW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
For Wireless Network Users f Temporarily connect the USB cable (not included) directly to the computer and the machine. j Enter the Network Key you wrote down in step 10-a on page 18, and then click Next. g Do one of the following: If the Installation confirmation screen appears, check the box and click Next, and then go to h. If the Installation confirmation screen does not appear, go to i. h Check Yes if you want to connect with the listed SSID. Click Next, and then go to k. NOTE If your network is not configured for Authentication and Encryption, the ATTENTION! screen will appear. To continue configuration, click OK. k Confirm the wireless network settings, and then click Next. The settings will be sent to your machine. i The wizard will search for available wireless networks from your machine. Choose the SSID that you wrote down for your network in step 10-a on page 18, and then click Next. NOTE • If the list is blank, check that the wireless access point/router has power and is broadcasting the SSID. See if the machine and the wireless access point/router are within range for wireless communication. Click Refresh. • If your wireless access point/router is set to not broadcast the SSID, manually add it by clicking the Advanced button. Follow the on-screen instructions for entering the Name(SSID), and then click Next. NOTE • The settings will remain unchanged if you click Cancel. • To manually enter the IP address settings of your machine, click Change IP Address and enter the necessary IP address settings for your network. • If the wireless setup failure screen appears, click Retry. l Disconnect the USB cable between the computer and the machine, and then click Next. Wireless setup is now complete. A four-level indicator at the right of your machine's LCD will show the wireless signal strength of your wireless access point/router. To install the printer driver, continue to step 13. For Windows® Users: Now go to step13-e on page 28 For Macintosh Users: Now go to step 13-d on page 30 21 Windows® Macintosh Wireless Network