Brother International HL-3400CN Quick Setup Guide - English - Page 2
Remove the Protective Parts, Install the OPC Belt cartridge
 |
UPC - 012502526223
View all Brother International HL-3400CN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
Step 1 Remove the Protective Parts Remove the protective parts, as shown. Step 2 Install the OPC Belt cartridge Open the Front Cover and the Top Cover. Release both green Belt Cartridge Lock Levers by pulling them toward you. Remove the orange Belt Tension Release Pins from both sides of the OPC Belt cartridge. Remove the Protective Sheet from the OPC Belt Cartridge. Insert the OPC Belt Cartridge into the printer cartridge guides with the flat side facing you. Lock the Belt Cartridge Lock Levers by pushing them backward until they click into place. Note Please be careful not to touch the green surface of the OPC Belt or expose it to light for any length of time.
-
1 -
2 -
3 -
4
 |
 |
Release both green Belt Cartridge Lock Levers
by pulling them toward you.
Remove the orange Belt Tension Release Pins
from both sides of the OPC Belt cartridge.
Insert the OPC Belt Cartridge into the printer
cartridge guides with the flat side facing you.
Lock the Belt Cartridge Lock Levers by pushing
them backward until they click into place.
Remove the protective parts, as shown.
Open the Front Cover and the Top Cover.
Remove the Protective Sheet from the
OPC Belt Cartridge.
Step 1
Remove the Protective Parts
Step 1
Remove the Protective Parts
Step 2
Install the OPC Belt cartridge
Step 2
Install the OPC Belt cartridge
Note
Please be careful not to touch the green surface of the OPC Belt or expose it to light for any length of
time.