Brother International HL 4070CDW Users Manual - English - Page 153
Error messages in Color Correction, Maintenance messages, Error messages continued - change belt
UPC - 012502617808
View all Brother International HL 4070CDW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 153 highlights
Troubleshooting Error messages (continued) Error message Size Mismatch Toner Life End Tray2 Error Unusable Device Waste Toner Full A ction Put the same size paper in the paper tray or MP tray that is selected in the printer driver, and then press Go, or select the size of paper you set in the Tray Size setting from the control panel. It is time to replace the toner cartridge. (See Replacing a toner cartridge on page 98.) Take out Tray2 and push it back in firmly. Remove the USB flash memory drive from USB Direct Interface. It is time to replace the Waste Toner Box. (See Replacing the waste toner box on page 116.) Error messages in Color Correction Call service message Action Calibrate Turn off the printer. Wait a few seconds, then turn it on again. Calibration Put in a new drum unit. (See Replacing the drum unit on page 105.) Put in a new belt unit. (See Replacing the belt unit on page 111.) 7 failed. See Troubleshooting Put in a waste toner box. (See Replacing the waste toner box on page 116.) chapter in User's guide. If the problem continues, call your dealer or Brother Customer Service. Registration Turn off the printer. Wait a few seconds, then turn it on again. Registration failed. See Troubleshooting chapter in User's guide. Put in a new belt unit. (See Replacing the belt unit on page 111.) If the problem continues, call your dealer or Brother Customer Service. Maintenance messages Error message o o n o Change Belt Unit Change PF KitXX Drum End Soon Fuser Unit End Laser Unit End Meaning A ction The four o marks (also n, n=blinking o) indicate the Black (K), Yellow (Y), Magenta (M), Cyan (C) toner cartridges from left to right. When the o mark blinks (shown as n in left), the indicated color toner is nearly empty. When the toner becomes empty, the o indicator disappears completely. Buy a new toner cartridge before you get a Toner Life End message. It is time to replace the belt unit. Replace the belt unit. It is time to replace the paper feeding kit XX. Replace the paper feeding kit. It is time to replace the drum unit. Replace the drum unit. (See Replacing the drum unit on page 105.) It is time to replace the fuser unit. Replace the fuser unit. It is time to replace the laser unit. Replace the laser unit. 144