Brother International HL-6180DW Wi-Fi Direct Guide - English - Page 25

Troubleshooting Error messages when configuring Wi-Fi Direct from the control panel menu Error Message Cause Action (For HL-5470DW(T) The Brother machine and your mobile  Move the mobile device closer to your and HL-6180DW(T)) device cannot communicate during the Brother machine. Connection Fail configuration.  Move your Brother machine and the (For MFC-8710DW and MFC-8910DW) mobile device to an obstruction-free area. 3 Connection Fail  If you are using the PIN Method of WPS, make sure you have input the correct (For MFC-8950DW(T)) PIN code. Connection Fail (For HL-5470DW(T) and HL-6180DW(T)) Other devices are trying to connect to the Wi-Fi Direct network at the same time. Connection Error (For MFC-8710DW and MFC-8910DW) Make sure there are no other devices trying to connect to the Wi-Fi Direct network and then try to configure the Wi-Fi Direct settings again. Connection Error (For MFC-8950DW(T)) Connection Error (For HL-5470DW(T) and HL-6180DW(T)) The Brother machine cannot find your mobile device. No Device (For MFC-8710DW and MFC-8910DW) No Device (For MFC-8950DW(T)) No Device  Make sure your machine and mobile device are in the Wi-Fi Direct mode.  Move the mobile device closer to your Brother machine.  Move your Brother machine and the mobile device to an obstruction-free area.  If you are manually configuring the Wi-Fi Direct network, make sure you have entered the correct password.  If your mobile device has a configuration page for how to obtain an IP address, make sure the IP address of your mobile device has been configured via DHCP. 22