Brother International HL-645M Quick Setup Guide - English - Page 2
Install the Toner & Drum, by pushing the two blue tabs in toward
View all Brother International HL-645M manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
Action 2: Install the Toner Cartridge / Drum Unit 1 Unpack the drum unit and gently rock it from side to side five or six times. 2 Remove the protective parts, in order, as shown in the illustration. NOTE Do not expose the drum unit to light for longer than a few minutes, as this will damage the drum. 3 Open the top cover. Open the drum cover by pushing the two blue tabs in toward the center of the unit and lifting the cover toward you. 4 Install the drum unit into the printer. Make sure that you gasp the v marks. 2
2
Action 2: Install the Toner Cartridge / Drum Unit
1
Unpack the drum unit and gently rock it
from side to side five or six times.
2
Remove the protective parts, in order, as
shown in the illustration.
NOTE
Do not expose the drum unit to light for
longer than a few minutes, as this will
damage the drum.
3
Open the top cover. Open the drum cover
by pushing the two blue tabs in toward the
center of the unit and lifting the cover
toward you.
4
Install the drum unit into the printer.
Make sure that you gasp the
▲
marks.