Brother International HL-660PS Users Manual - English - Page 59
Alarm Indications At A Glance
View all Brother International HL-660PS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
English CHAPTER 6 TROUBLESHOOTING CHAPTER 6 TROUBLESHOOTING ALARM INDICATIONS AT A GLANCE Operator Calls If an error occurs, the printer indicates an 'operator call' by blinking the ALARM lamp and any of the following lamps. Find the error and take the proper action to correct it. The printer automatically recovers from most errors, but you may need to reset the printer with the switches as described below. Blinking Lamp PAPER r£q ALARMr£q Error Paper jam Paper empty Mis Feed COVER r£q ALARMr£q Cover open TONER r£q Toner low ALARMr£q ( every 5 seconds) TONER r£q Toner Empty ALARMr£q Action Clear the paper jam referring to the next section "PAPER JAMS" and press the FF/CONT switch if the printer does not automatically resume printing. Load paper into the printer referring to Chapter 2 and press the FF/CONT switch. Reinstall the paper and press the FF/CONT switch. Close the top cover of the printer or press firmly on the multi-purpose sheet feeder to make sure it is properly installed. Indicates that the printer has approximately 100 pages of printing left before the toner cartridge is empty. Replace the toner cartridge with a new one. r OFF q ON 6-1