Brother International HL-665 Quick Setup Guide - English - Page 3
Do Not Move The Shutter Lever, Until The Cartridge Is
View all Brother International HL-665 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
English 5 6 7 8 Unpack the toner cartridge and gently rock it from side to side well before installing. ( x ) Then, remove the protective parts.( y ) CAUTION DO NOT MOVE THE SHUTTER LEVER UNTIL THE CARTRIDGE IS INSTALLED. Install the toner cartridge into the drum unit. Make sure that the v marks are aligned. Gently pull the blue shutter lever on the toner cartridge forward until the red arrows are aligned. Close the drum cover ( x ) and push gently until it clicks into place. Close the top cover. ( y ) See "CHAPTER 5 MAINTENANCE" in the User's Guide for more information about replacement of the toner cartridge. 3
3
English
5
Unpack the toner cartridge and gently rock
it from side to side well before installing.
(
)
Then, remove the protective parts.(
)
CAUTION
DO NOT MOVE THE SHUTTER LEVER
UNTIL THE CARTRIDGE IS
INSTALLED.
6
Install the toner cartridge into the drum
unit. Make sure that the
▲
marks are
aligned.
7
Gently pull the blue shutter lever on the
toner cartridge forward until the red arrows
are aligned.
8
Close the drum cover (
) and push gently
until it clicks into place.
Close the top cover. (
)
See “CHAPTER 5 MAINTENANCE” in
the User’s Guide for more information
about replacement of the toner cartridge.